Chocolate bark
One bag of Merckens coating, spread in a thin layer, topped with sprinkles or candy and broken into pieces. There is no baking and no tempering. One batch makes about 1 lb, and the page comes with eight versions for holidays and any day.
- Makes
- About 1 lb, or 24 pieces
- Hands-on time
- About 15 minutes
- Ready in
- About 35 minutes
- Keeps
- About 2 weeks in an airtight container
Get the supplies
Tick what you need and untick anything you already have. Each tick adds one regular pack at its normal price.
The bark itself. The recipe uses the whole bag.
In stock
Good to have
For a white swirl. The recipe uses about 3 oz. Keep the rest for another batch.
In stock
Half-sheet parchment paper to line the pan. About 46 sheets.
In stock
Clear gift bags. One batch fills about two.
In stock
From your kitchen
- A rimmed baking sheet
- A microwave-safe bowl, completely dry
- A second small microwave-safe bowl, if you want a swirl
- A spatula, and a toothpick or the tip of a knife
- A large knife, if you want neat squares
- A food thermometer is useful, but you can work without one
Chocolate bark
Makes: About 1 lb, or 24 piecesHands-on time: About 15 minutesReady in: About 35 minutes
Ingredients
- 1 lb Merckens Cocoa Dark coating wafers
- ¼ cup sprinkles
- 3 oz Merckens White coating wafers, for a swirl (optional)
Tools
A rimmed baking sheet lined with parchment paper, a dry microwave-safe bowl, a spatula and a toothpick.
The bark is one layer, so it uses one whole bag. Spread it to about 12 × 8 in. That gives a layer about ¼ in. thick: thick enough to hold together in a bag, and thin enough to bite.
For larger toppings, such as chocolate rocks or candy pieces, use up to ½ cup in place of the sprinkles.
Method
-
Line the sheet and dry your tools
Line a rimmed baking sheet with parchment paper. Check that the bowl, spatula and toothpick are completely dry. Put the sprinkles in a small dish.
One drop of water can turn melted coating thick and grainy.
-
Melt the coating
Put the Cocoa Dark wafers in the microwave-safe bowl. Microwave them for 30 seconds on medium-high power, then stir. Continue in bursts of 15 to 30 seconds, and stir after each one, until the coating is smooth. Do not let it go above 120°F.
The wafers keep their shape until you stir them, so stir before you decide to heat again.
-
Let it cool a little
Let the coating cool until it is only just warm, about 100°F, before you use it. Stir it now and then while it cools. If you want a swirl, melt the white wafers in the second microwave-safe bowl the same way now, and let them cool too.
-
Spread the layer
Pour the coating onto the paper. Spread it into a rectangle about 12 × 8 in. and about ¼ in. thick. Tap the sheet on the counter a few times to level it and bring up air bubbles.
Aim for an even layer. Thin edges break first and thick spots are hard to bite.
-
Swirl a second color, if you like
Drop small spoonfuls of the white coating over the dark layer. Drag a toothpick or the tip of a knife through them, first one way and then the other. Stop after a few strokes, while you can still see both colors.
Too many strokes blend the colors into one.
-
Add the topping and press it in
Scatter the sprinkles over the bark immediately, while the coating is wet and shiny. Press them in gently with your fingertips or the flat of the spatula so they stay on when you break the bark.
If the coating has turned dull, it has set, and the topping will not stick.
-
Chill until firm
Put the sheet in the refrigerator for about 15 minutes, until the bark is firm when you touch it. Take it out as soon as it is firm.
Bark left in the refrigerator collects moisture when it comes out.
-
Break or cut
Lift the bark out by the paper. Break it into pieces about 2 in. across. For neat squares, let it stand for about 10 minutes first, then cut it with a large knife, pressing straight down.
To store: Keep in an airtight container in a cool, dry place for about 2 weeks. Do not refrigerate.
Gloria's Cake & Candy Supplies, 11117 Washington Blvd, Culver City. www.gloriascakeandcandy.com/pages/chocolate-bark
If something goes wrong
The melted coating is too thick
Wafers that are old or that took up a little moisture melt smooth but thick. Stir in paramount flakes and keep stirring until they melt in. Merckens gives ¼ oz (7 g) for each pound of coating. If the coating is still too thick, add the same amount again.
Do not add water, milk, butter or ordinary food coloring. They make the coating thicker.
If the coating is grainy or stiff because water got into it, or because it went above 120°F, flakes may not save it. Start again with fresh wafers.
The topping falls off when I break the bark
The coating began to set before the topping went on, or the topping only sat on the surface. Add it as soon as the layer is spread, and press it in gently. Larger pieces need a firmer press than sprinkles.
The bark is too thin and shatters, or too thick to bite
The layer was spread over too large or too small an area. For one bag, aim for about 12 × 8 in. and about ¼ in. thick. A rimmed sheet keeps the edges from running thin.
The swirl turned muddy
The colors were mixed too much. Use only a few strokes with the toothpick. Spread the first layer and swirl straight away, while both coatings are just warm, about 100°F.
The coating has white streaks or dull patches
This is called bloom. It happens when the coating was too hot or too cool when you used it, or when it set slowly in a warm room. It is safe to eat.
Next time, use the coating when it is just warm, about 100°F, and let it set in the refrigerator for a few minutes.
How to store it
Put the pieces in an airtight container with parchment paper between the layers. Keep the container in a cool, dry place, away from strong smells. The bark stays good for about 2 weeks.
Do not store it in the refrigerator or the freezer. Water forms on cold bark when it comes back to room temperature, and that makes the coating dull and the topping sticky.
Wrap it as a gift
One batch fills about two half-pound cello bags. Close each bag with a red twist tie or a pink bow tie.
For a small boxed gift, use a ¼ lb gold candy box with a clear lid. Put parchment paper between the pieces.
Ways to change it
Christmas swirl
Use Merckens White for the bark. Swirl in about 2 oz each of red and dark green coating. Top with Christmas tree quins or the holiday quins and nonpareils mix.
Valentine's Day
Use Merckens pink for the bark and swirl in about 3 oz of white. Top with large red heart quins or small red, white and pink hearts. Add a few shimmer pink chocolate pearls if you like.
Easter pastels
Use Merckens White for the bark. Swirl in about 1 oz each of pink, light green and blue. Top with Easter quins or pastel confetti quins.
Halloween
Use Merckens orange for the bark and swirl in about 3 oz of Cocoa Dark. Top with pumpkin quins and black sanding sugar. Press in a few sugar eyes here and there.
Birthday
Use Merckens Super White for the bark so the colors stand out. Top with small bright quins or rainbow nonpareils. Use about ¼ cup in all.
Chocolate lover's bark
Make the base recipe with a white swirl. In place of sprinkles, press in about ½ cup of chocolate rocks and dark chocolate crispearls.
Gold stars, for any celebration
Use Cocoa Dark for the bark. Top with gold star quins and a light scatter of gold sanding sugar. It works for New Year's Eve, a graduation or a party table.
Questions people ask
How is this different from your peppermint bark?
This bark is one layer of coating with a topping, so it uses one bag and suits any season. Our peppermint bark has two layers, dark and white, with crushed peppermint through both.
Can I stir the topping in?
Yes, for firm toppings such as chocolate rocks. Stir up to ½ cup into the cooled coating, then spread it. Keep sprinkles and sanding sugar on top, where they show.
How do I make a bigger batch?
Use two bags of coating and about ½ cup of sprinkles. Spread the coating to about 16 × 12 in. on an 18 × 13 in. half sheet pan. That makes about 2 lb.
Can I use chocolate chips instead of coating wafers?
You can, but the result is less predictable. Chocolate chips are real chocolate. Unless real chocolate is tempered, it can set dull or streaky, and it softens more easily in a warm room.
Merckens coating wafers are made to melt and set without tempering, so they are the easier choice here.
How do I get the supplies?
Tick the supplies on this page and add them to your cart. Choose pickup at 11117 Washington Blvd in Culver City; orders are usually ready within 24 hours and we email you when yours is ready. We also ship.
You can also buy everything in the shop. See our hours.
What about allergies?
If you add nuts or candy from the grocery store, they may contain peanuts, tree nuts, milk or wheat. Read the ingredient label on every pack before you make this for someone with a food allergy. A label does not always say when a product is made on equipment that also handles nuts, milk or wheat. If you are not sure, ask the manufacturer.
Stuck? Ask us.
Gloria's has helped Los Angeles bakers and candy makers since 1972. Call the shop on (323) 289-8807, or bring your question to 11117 Washington Blvd in Culver City. We are normally open Tuesday to Saturday, 10 a.m. to 6 p.m. Check this week's hours and get directions
More to make
Peppermint barkDark and white coating with crushed peppermint. No baking and no tempering.Makes about 1½ lb. About 20 minutes of work.
Chocolate-covered pretzelsSmall pretzel twists dipped with a fork and finished with sprinkles or a drizzle.Makes about 50. About 30 minutes of work.
Chocolate-covered sandwich cookiesSandwich cookies covered in Merckens coating, dipped with a fork or set in a cookie mold.Makes about 24. About 30 minutes of work.