Eight small round milk chocolate hot cocoa bombs with a piped seam, on parchment paper

Hot cocoa bombs

Hollow shells of Merckens coating, filled with hot cocoa mix and mini marshmallows. Pour hot milk over one in a mug and the shell melts open. One batch makes about 8 small bombs, each about 2 in. across, for mugs of cocoa or small gifts.

Makes
About 8 small bombs
Hands-on time
About 1 hour
Ready in
About 2 hours
Keeps
About 2 weeks in an airtight container

Get the supplies Go to the recipe

Get the supplies

Tick what you need and untick anything you already have. Each tick adds one regular pack at its normal price.

Sphere Medium Silicone Mold

Makes 8 half shells at a time, each about 2 in. across. You fill it twice for 8 bombs.

In stock

$18.95
Merckens Cocoa Lite Confectionery Coating Wafers - 1 lb

Milk chocolate taste for the shells and seams. The recipe uses about 12 oz, three-quarters of the bag.

In stock

$9.50

Good to have

12" Disposable Pastry Piping Bag

Pipes melted coating around each seam. One or two bags for a batch.

In stock

$0.60
Merckens Super White Confectionery Coating Wafers - 1 lb

For a white drizzle over the finished bombs. About 2 oz.

In stock

$9.50
Xmas Trees Sprinkle Quins

Press onto the wet seam or drizzle.

In stock

$2.99
3 lb Cello Bags 5.5”x3.25”x12.5” (50 pc)

Clear gift bags with a 5½ × 3¼ in. base. Two or three small bombs in each.

In stock

$14.95
4 oz Paramount Flakes

Thins coating that melts too thick. A little goes a long way.

In stock

$5.95

From the grocery store and your kitchen

Gloria's does not sell the first three. Buy them at a grocery store.

  • Hot cocoa mix, about ½ cup
  • Mini marshmallows, about 24
  • Milk to serve, about ¾ cup for each bomb
  • Two microwave-safe bowls, completely dry
  • A clean, dry pastry brush or a small spoon
  • A plain microwave-safe glass or ceramic plate with no metal trim
  • A baking sheet lined with parchment or waxed paper
  • An oven mitt
  • Food-safe gloves, if you have them

Hot cocoa bombs

Makes: About 8 small bombsHands-on time: About 1 hourReady in: About 2 hours

Ingredients

  • 12 oz Merckens Cocoa Lite coating wafers (three-quarters of a 1 lb bag)
  • ½ cup (8 tablespoons) hot cocoa mix, 1 tablespoon for each bomb
  • About 24 mini marshmallows, 3 for each bomb
  • Sprinkles or 2 oz Merckens Super White wafers to decorate (optional)
  • To serve: about ¾ cup (6 oz) milk for each bomb

Tools

A silicone mold with half-sphere cavities, two dry microwave-safe bowls, a pastry brush or spoon, a plain microwave-safe plate, a piping bag and a lined baking sheet.

Each bomb needs two half shells. The mold makes 8 half shells at a time, so you fill it twice to make 8 bombs.

These are small bombs, about 2 in. across. Each one makes a small mug of cocoa. For a large mug, or for richer cocoa, use two.

No scale? 12 oz is three-quarters of a 1 lb bag. Keep the last quarter in the bag for another day.

Method

  1. Dry everything, then melt the coating

    Check that the mold, the bowls, the brush and the spoon are completely clean and dry. Line a baking sheet with parchment paper. Put the 12 oz of wafers in a microwave-safe bowl. Microwave them for 30 seconds on medium-high power, then stir. Continue in bursts of 15 to 30 seconds, and stir after each one, until the coating is smooth. Do not let it go above 120°F. Let the coating cool until it is only just warm, about 100°F, before you use it.

    One drop of water can turn melted coating thick and grainy.

  2. Coat the cavities

    Spoon about 1½ teaspoons of coating into each of the 8 cavities. Use the brush or the back of the spoon to spread the coating up the sides, all the way to the top edge. If coating pools in the bottom, spread it back up the sides.

    Make the top edge even all the way around, because the two halves join there.

  3. Chill, then add a second coat

    Put the mold in the refrigerator for about 10 to 15 minutes, until the coating is firm. Take it out as soon as it is firm. If the coating in the bowl has thickened, microwave it for about 15 seconds, stir, and let it cool until just warm. Brush a second coat over the first, about 1 teaspoon in each cavity, thickest at the top edge. Chill again for about 10 to 15 minutes.

    A thin shell cracks when you take it out, and the top edge breaks first.

  4. Release the shells

    Peel the silicone back from the edge of one cavity, then press gently on the bottom of the mold to push the shell out. Touch the shells as little as you can, because warm fingers leave marks. Wear food-safe gloves if you have them. Set the shells open side up on the lined sheet. Then coat, chill and release a second round in the same way, so that you have 16 half shells.

    If a shell sticks, put the mold back in the refrigerator for a few minutes and try again.

  5. Fill the bottom halves

    Put 1 tablespoon of hot cocoa mix and 3 mini marshmallows into 8 of the shells. Keep the top edge clean, because the two halves join there. Keep the other 8 shells empty for the tops.

  6. Seal the halves on a warm plate

    Heat the plate in the microwave in 30-second bursts until it feels warm. Use an oven mitt, because the plate can get hot. Hold an empty shell open side down on the plate and turn it gently for a few seconds, until the edge just melts. Put it straight onto a filled shell and press gently. Wipe the plate with a dry paper towel and warm it again when the edges stop melting.

    Melt only the edge. If you hold the shell on the plate too long, the shell gets thin and can break.

  7. Pipe the seams and let them set

    Warm the coating that is left in the bowl in bursts of about 10 to 15 seconds, and stir, until it is smooth. Let it cool until just warm. Spoon it into a piping bag and cut a small tip. Pipe a thin line around each seam to close any gaps. Add sprinkles while the line is wet. Let the bombs set at room temperature for about 20 minutes before you pack them.

  8. To serve, pour hot milk over a bomb

    Put a bomb in a mug. Heat about ¾ cup (6 oz) of milk in a microwave-safe cup until it steams, and do not let it boil. Stir the milk, then pour it slowly over the bomb. When the shell opens, stir until the cocoa mix dissolves. The milk is hot enough to burn, so an adult should heat and pour it, and check that the cocoa has cooled enough before a child drinks it.

    Microwaved milk can have very hot spots, so always stir it before you pour.

To store: Keep in an airtight container in a cool, dry place for about 2 weeks. Do not refrigerate.

Gloria's Cake & Candy Supplies, 11117 Washington Blvd, Culver City. www.gloriascakeandcandy.com/pages/hot-cocoa-bombs

If something goes wrong

The shells crack or stick in the mold

Shells crack when they are too thin, most often at the top edge. Next time, add a second coat and make the edge thicker. If a shell sticks, the coating has not set yet. Chill the mold for about 5 minutes more. Do not put it in the freezer.

To mend a small crack, brush on a little coating that is only just warm, and chill the shell until it is firm.

The halves will not stay together

The edges did not melt enough, or they were uneven. Warm the plate again and melt the edge of the top shell until it is wet all the way around. Then pipe a line of coating around the seam to close any gaps.

There are fingerprints on the shells

Warm hands melt the surface of the coating. Hold the shells as little as you can, by the edges, or wear food-safe gloves. A piped line or a drizzle over the top also hides small marks.

The bomb does not open in the milk

The milk was not hot enough, or the shell is thick. Pour the milk slowly over the top of the bomb, not around it. If the shell stays closed, add a little more hot milk and stir until it melts.

The melted coating is too thick

Wafers that are old or that took up a little moisture melt smooth but thick. Stir in paramount flakes and keep stirring until they melt in. Merckens gives ¼ oz (7 g) for each pound of coating. If the coating is still too thick, add the same amount again.

Do not add water, milk, butter or ordinary food coloring. They make the coating thicker.

If the coating is grainy or stiff because water got into it, or because it went above 120°F, flakes may not save it. Start again with fresh wafers.

How to store it

When the seams are set, put the bombs in an airtight container in a single layer, or wrap each one. Keep them in a cool, dry place, away from sunlight and heat. They stay good for about 2 weeks.

Do not store them in the refrigerator or the freezer. Water forms on cold coating when it comes back to room temperature, and the shells turn dull and sticky.

Wrap it as a gift

Put two or three bombs in a clear cello bag and close it with a gold twist tie.

Add a card that says: put one bomb in a mug, pour about ¾ cup of steaming milk over it, and stir. Add that the milk is hot and that an adult should heat and pour it.

Ways to change it

Dark or white shells

Use Merckens Cocoa Dark or Merckens Super White in place of Cocoa Lite. A white shell with a dark seam is easy to see on a gift table.

Peppermint cocoa

Add 1 teaspoon of candy cane peppermint crunch to each bomb with the cocoa mix, and press a little more onto the wet seam.

Holiday colors

Make the top halves in red or dark green Merckens coating and the bottom halves in Cocoa Lite.

White drizzle and stars

Drizzle the finished bombs with melted Super White coating and scatter gold star quins over the drizzle while it is wet.

Questions people ask

How do I use a hot cocoa bomb?

Put the bomb in a mug. Pour about ¾ cup (6 oz) of steaming milk slowly over it. When the shell opens, stir until the cocoa mix dissolves. For a large mug, use two bombs and about 1½ cups of milk.

The milk is hot enough to burn. An adult should heat and pour it, and check that the cocoa has cooled enough before a child drinks it.

Can I use chocolate chips instead of coating wafers?

You can, but the result is less predictable. Chocolate chips are real chocolate. Unless real chocolate is tempered, it can set dull or streaky, and it softens more easily in a warm room.

Merckens coating wafers are made to melt and set without tempering, so they are the easier choice here.

Do I need a thermometer?

No, but it helps. Without one, heat the coating in short bursts, stir each time, and stop as soon as the last wafers melt. The coating must never feel hot. Then wait until it feels only slightly warm before you use it.

With a thermometer, melt the coating to between 115°F and 120°F, and use it at about 100°F.

How far ahead can I make them?

About 2 weeks ahead, if you keep them in an airtight container in a cool, dry place.

How do I get the supplies?

Tick the supplies on this page and add them to your cart. Choose pickup at 11117 Washington Blvd in Culver City; orders are usually ready within 24 hours and we email you when yours is ready. We also ship.

You can also buy everything in the shop. See our hours.

What about allergies?

You serve these with milk, and most hot cocoa mixes contain milk too. Read the ingredient label on every pack, including the cocoa mix, the marshmallows and the coating, before you make these for someone with a food allergy. A label does not always say when a product is made on equipment that also handles nuts, milk or wheat. If you are not sure, ask the manufacturer.

Stuck? Ask us.

Gloria's has helped Los Angeles bakers and candy makers since 1972. Call the shop on (323) 289-8807, or bring your question to 11117 Washington Blvd in Culver City. We are normally open Tuesday to Saturday, 10 a.m. to 6 p.m. Check this week's hours and get directions

More to make

See all recipes